★ Working voltage: 6V. 4 high-energy alkaline batteries

★ Static power consumption:<15 microamperes ★ Dynamic power consumption: 120mA~180mAh

★ Battery life: 8 to 12 months of normal use

★ Low voltage alarm: When the voltage is below about 4.8V, the door can be opened dozens of times or more

★ Emergency opening: Uncontrolled, even if the square tongue is locked, the door can still be opened

★ Opening time: It is effective to open the door once after pressing the handle, and it will automatically lock after 10 seconds of not opening the door

★ Reliability: 1000 consecutive normal card insertions without a single error

★ Unlock record: The latest 350 records are stored inside the lock

★ Guarantee condition: Contact with any illegal card, the internal circuit of the lock will not be damaged, and it can still be used normally

★ Mechanical key: A mechanical emergency unlocking mechanism with a completely independent transmission system, ensuring that the door lock can still be opened normally in emergency situations

Installation requirements: The door thickness should be between 38-85mm. If there is lace on the surface of the door, the lace should be at least 105mm away from the door edge

★ Working temperature: -20 ℃ to+55 ℃ (special requirements can reach -35 ℃ to+85 ℃)

★ Interface function: Provides a dynamic link library that can be integrated with any hotel management system at home and abroad to achieve hotel information resource sharing;

★ Door opening direction: left push door, right push door, left pull door, right pull door;

★ Card type: TEMIC induction card (contactless card) from the United States, or Mifare1 induction card (contactless card) from PHILIPS from the Netherlands;

 

1. Active handle structure to prevent external damage Five tongue lock body (also known as clutch type): After testing, this lock body cannot be broken from the door handle to open the door, fully meeting anti-theft standards;

2. International standard five lock tongue structure: equipped with anti slip safety tongue and indoor anti lock large tongue, with mechanical key for emergency door opening;

3. The lock body is stamped with the original imported mold: compact structure, good mechanical linkage, and smooth opening. The lock body should be made of 2MM steel plate to ensure that it can be opened more than 500000 times;

4. Design of anti drilling and anti sled panels, with reinforced anti oxidation treatment on the surface of the panels;

5. The circuit is controlled by a microcomputer chip and comes with a built-in error correction function, making the circuit more stable;

6. Battery undervoltage alarm function;

7. Circuit ultra-low power consumption and anti-interference design. eight Alarm reminder for abnormal state of door lock anti tilt insertion.

 

1. Strict time limit function: The lock has a built-in clock, and through strict time settings, when the guest's room expires, the room card will automatically become invalid, effectively avoiding the phenomenon of guests defaulting on rent;

2. Multi level key cards with clear responsibilities: According to hotel management needs, you can set up your own main card, building card, floor card, cleaning card, and guest card;

3. Do not disturb function to enhance the friendly image of the hotel: After guests enter the room, lock it and the waiter cannot open the door to disturb (except for emergency situations where emergency cards are used);

4. Key card loss reporting function, flexible termination of key cards: After a key card is lost, with simple settings in the front desk management system, the lost key card becomes invalid, and customers can rest assured;

5. Door opening record query function, adding an extra security feature: the door lock comes with a data "black box" that can record the historical door opening records (when, who, and how the door was opened) for easy retrieval;

6. Additional functions can be added: According to the needs of the hotel, smart card safes, smart card power withdrawals, smart card elevator rides, smart card settlement payments, etc. can be added to achieve multiple uses of one card, which is more helpful in improving the hotel's performance

The level and reduction of hotel resources and manpower.

 

WINDOWS has a user-friendly style, complete functions, and easy operation.

 

1. Fully simulate hotel front desk operation management, integrating a series of functions such as booking, check-in, room renewal, room change, key card loss reporting, check-out, etc., and can perform various information queries

Generation and printing of reports;

 

2. The interface is beautiful, clear, easy to operate, and clear at a glance.

 

Our company's circuit board adopts imported chips from the United States, with a dual circuit structure and dual chip design, which is safe, reliable, and fast in response! Stable operation! Large capacity and long lifespan!

2. Low static power consumption, all less than 10uA

3. Wide range of environmental temperature adaptation: -40 ℃~85 ℃

4. It can be used simultaneously for T5777 and EM4305. Our company's new generation products fully adopt the only circuit board in China with comprehensive safety design (electronic door lock, sauna lock)

Access control home electronic lock

 

1. Data security: Hardware encryption+software encryption secure internal data storage to ensure data security;

2. Program security: anti read: special core MCU hardware encryption structure+internal program cracking self damage;

Anti decryption: Program instructions are encrypted and stored, dynamically decrypted and executed, and cannot be disassembled and interpreted;

Anti duplication: Program instructions are encrypted based on their own hardware and software conditions, and copying to another MCU may not run correctly;

Anti tracking: Program instructions dynamically overwrite execution, timed time control, to prevent tracking interpretation;

3. Card anti duplication: Card data is processed using anti duplication algorithms; The only manufacturer in China that uses MCU with security processing function to ensure the security of your door lock electronic key

 

1. Adopting a new patented gear dual arm spring longitudinal push clutch. More than five times longer lifespan than traditional structures: continuous operation 200000 times without failure

2. Using the principle of three-dimensional plane motion, it is simple and reliable.

3. Five lock tongue linkage structure, safer.

4. Anti insertion slanted tongue: With 100% anti insertion guarantee.

5. Combine slanted tongues to assist in easy door opening and reduce vibration.

6. There is a micro switch inside the lock cylinder, and various working states can be recorded.

7. Anti lock function, more user-friendly.

8. International universal European and American standard lock bodies, domestic lock circuit board universal interface, low motor power consumption, lock body advantages as door locks require strong stability, good impact resistance, and excellent anti jamming performance,

The phenomenon of not opening the door cannot occur. The lock cylinder of smart door locks on the market now has many defects in the heart part - clutch, mainly manifested in small transmission torque and the existence of transmission dead corners,

The rigidity of the steel wire transmission torque is poor, the transmission assembly is difficult, and it is prone to fatigue; Difficulty in installation and easy to get stuck. Practice has proven that over 50% of smart door lock failures on the market occur in the clutch. We provide

A smart door lock clutch that can change the many defects of the original clutch and achieve stable functionality.

9. High torque and excellent anti jamming performance: By using a gear set to reduce speed and increase force, the driving force of the clutch device is greatly enhanced, and the anti jamming performance is greatly improved.

10. Enhanced impact resistance, adopting an integral structure with a high degree of integration; Less parts, strong rigidity, and good impact resistance.

11. Good stability performance, due to the large output torque and good overall integrity, dual arm spring longitudinal thrust is adopted, and the stability of the clutch is good.

12. Extended battery life, with no dead corners during movement. And through the reduction and force increase of the gear set, the battery will not be affected by the different required forces to push at different positions

The phenomenon of different output currents. The starting current is 60-100mA, which is more than twice as low as the traditional clutch's 200mA and extends the battery life by more than three times.

13. Easy installation: high integration, easy to install, simple structure, good rigidity, smooth operation, and easy installation.

14. It can work continuously for 200000 times without any faults, reaching the highest standard in the industry.

 

The Mifare-1 card door lock supports the use of Mifare-1S50 (1Kbytes)/S70 (4Kbytes) cards, and can select any sector from 1-14 sectors of the card as the door lock application area. Other sectors are open, and using Mifare-1 card can truly achieve "one card" management. It also allows each subsystem of third-party management software to freely write relevant information and consumption amounts to different areas of the card. Each area is used independently and has encrypted passwords, without interference, ensuring the simplicity and security of implementing the hotel's one card function. In response to the user's need for "one card management", Philips' Mifare-1 card is the preferred choice, providing the best system solution for hotels to implement the one card function.

 

安全性高：

The serial number of Mifare-1 card is globally unique, and each card's serial number is unique and cannot be changed. And each zone of the Mifare-1 card has an independent read-write password, which can flexibly control the reading of information according to application needs. The RF communication signal between Mifare-1 card and reader/writer is encrypted with 3-DES, which can meet the security requirements of one card systems such as public transportation and consumer goods.

 

Advanced technology:

Mifare-1 card successfully combines radio frequency identification technology (RFID) and IC card technology, solving the problem of passive (no battery in the card) and contactless, which is a major breakthrough in the field of electronic devices and has broad prospects for future applications.

 

Strong universality:

Mifare-1 card complies with the ISO/IEC 14443TYPEA standard, is internationally recognized, and has a wide range of applications.

 

High reliability:

There is no mechanical contact between the Mifare-1 card and the reader/writer, avoiding various malfunctions caused by contact reading and writing. For example, faults caused by rough insertion of cards, insertion of non card foreign objects, poor contact due to dust or oil stains, and other reasons. In addition, there are no exposed chips on the surface of Mifare-1 cards, so there is no need to worry about chip detachment, electrostatic breakdown, bending damage and other issues that may cause card failure. This not only facilitates card printing, design, packaging and advertising, but also improves the reliability of card use and extends the service life of card reading devices and cards.

Easy to operate:

Due to non-contact communication, the reader can operate the card within a range of 10 centimeters, so there is no need to plug or unplug the card, which is very convenient for users to use. Mifare-1 card has no directionality when used, and the card can skim over the surface of the reader in any direction to complete the operation, greatly improving the speed of each use.

降低成本：

Due to the multiple independent partitions of the Mifare-1 card, applications from different systems can be implemented on the same card, reducing the procurement and management costs of the card.

 

Comparison of parameters between Mifare-1 card and T5557 card:

M1 card is the abbreviation for Mifare-1 card, which is a radio frequency card that complies with the ISO14443TYPEA international standard. M1 card is an encrypted storage card, and the RF signal is encrypted with triple DES (3-DES), which has the best confidentiality among all encrypted storage cards currently available. M1 card has high confidentiality, large capacity, and good system integration, which can improve the image and level of the entire system and leave space for future system expansion.

The following is a comparison of the main parameters between the M1 card and the commonly used induction card T5557 in domestic door locks:

 

 

In terms of smart card applications, it has always been at the forefront of its peers, with a series of mature products including contact IC cards (door opening card model: SLE4442), TM cards (door opening card model: DS1991), as well as various RF cards such as ATMEL cards (door opening card model: 88RF256-12, T5557), TI cards (door opening card model: RI-TRP-W4FF), M1 cards (door opening card model: S50), etc. With the development of technology, the advantages of M1 cards have become increasingly prominent, and market demand is also growing. According to a survey, M1 cards will account for 39% of the access card types in 2006, ranking first in the market share, while low-frequency ID cards, which used to rank first, only account for 30% of the market share (data source: ASCHINA, May 2006 edition). In order to facilitate system integration, with the continuous acceptance and recognition of the smart door lock industry, M1 card is inevitably a development trend

 

1. Strict time limit function: The lock has a built-in clock, and through strict time settings, when the guest's room expires, the room card will automatically become invalid,

Effectively prevent guests from defaulting on rent payments;

2. Multi level key cards with clear responsibilities: According to hotel management needs, you can set up your own main card, building card, floor card, cleaning card, and guest card;

3. Please do not disturb function to enhance the friendly image of the hotel: once guests enter the room and lock it, the waiter cannot open the door to disturb (except for emergency situations where emergency cards are used);

4. Key card loss reporting function, flexible termination of key cards: After a key card is lost, with simple settings in the front desk management system, the lost key card becomes invalid, and customers can rest assured;

5. The door opening record query function adds an extra security feature: the door lock comes with a data "black box" that can record the historical door opening records of the door lock (when, by whom, and in what way it was opened)

Door) for easy inquiry;

6. Additional functions can be added: According to the needs of the hotel, smart card safes, smart card power withdrawals, smart card elevator rides, smart card settlement payments, etc. can be added to achieve multi use of one card,

More conducive to improving the level of the hotel and reducing its resources and manpower.

 

 

 

 

series	model	unit	quantity	Remark
hotel door lock	EM4305/Mifare-1	turn	1	One per guest room
card dispenser	EM4305/Mifare-1	platform	1	Usually two, one for backup and one for use at the front desk
Data processor	EM4305/Mifare-1	platform	1	Optional, for downloading door lock unlocking records
power take-off switch	EM4305/Mifare-1	a	1	Each room is equipped with one, and after entering the room, a card is inserted to access power
room key		Zhang	1	Each lock is equipped with 3-5 guest cards. Due to the high usage of cards for single and double rooms with multiple people, there are more cards available
door lock software	induction	set	1	One set, for managing door locks

 

 

 

 

 

1	Lock core (lock body)	10	Battery box (including battery)
2	Cross groove wood screw	11	Hexagonal socket screw
3	Mechanical lock head	12	Side panel
4	Hexagonal socket screw (lock head)	13	Cross groove countersunk screw
5	Generous shaft	14	Buckle plastic box
6	front panel	15	locking plate
7	Generous shaft	16	Cross groove wood screw
8	Rectangular axis	17	Lock head cover
9	rear panel	18	door